i can't access my modem on Mac OS X 10.5
Sometimes in order to get your Mac to communicate with your modem extra settings need to be adjusted on your Mac. If your Mac and modem don't automatically communicate each other, the steps below may help you out. If you're unsure of what Mac OS X version you are using, click here.
Go to "System Preferences" via the Apple icon in the top left menu bar or via the Dock as shown below.
1. System Preferences
Choose "Network" under the Internet & Network section.
2. Network
This page gives you an idea of what's going on with the various network configurations on your Mac. You will automatically be directed to the highest priority connection which by default is Built-in Ethernet. This is okay as this is where we need to be.
If your computer is having problems connecting the modem, the "IP address" field will either be blank or it might start with 169.
Click on the "Configure" menu and change from "Using DHCP" to "Manually"
Once you have changed to "Manually" you will need to know some of your modem details so you can set a new IP address, Subnet Mask and Router. The following details will allow you to connect to one of our Belkin modems. If you do not have a Belkin modem, refer to your modem manual or contact the manufacturer for the required details.
Click "Apply".
You should now be able to browse to your modem correctly.
