BoB tech specs
Home »
Bob » BoB Specifications . Dimension & Networking - iiNet Australia
upfront
| dimensions |
214mm width
177.5mm height (199.2mm with handset)
67.5mm depth |
| weight |
465g |
| LEDs |
power, ADSL sync, internet, wired, wireless, phone 1, phone 2, storage/3g |
networking
| ports |
4 |
| maximum users |
253 (LAN), 16 (WLAN) |
| supported wireless standards |
IEEE: 802.11n draft 2.0, 802.11g, 802.11b |
| supported wired standards |
IEEE: 802.3u, 802.3, 100BASE-TX |
| wireless security |
WPA™, WPA2™, 64-bit & 128-bit WEP encryption |
| supported VPN protocols |
PPTP, IPSec pass-through |
| wireless link rate |
up to 300Mbps in 40MHz Channel Mode |
| wired link rate |
100Mbps |
internet
| supported ADSL standards |
T1.413 Issue 2, G.992.1 (G.DMT), G.992.3 (ADSL2), G.992.5 (ADSL2+), G.992.5 Annex M (ADSL2+M) |
| supported ADSL protocols |
PPPoE, PPPoA, 1483 bridged, dynamic/fixed IP, 1483 routed |
phone
| handset support |
supports up to 5 Digital Enhanced Cordless Telecommunications (DECT) compliant handsets |
| VOIP accounts |
2 (from one provider) |
| supported VOIP codecs |
G.711 U Law, G.711 A Law |
| PSTN failover ports |
1 |
USB ports
| ports |
1 x storage/3G & charge port
1 x charge-only port |
| USB power supply |
supplies 500mA to port (if more is required, device must be externally powered) |
| supported file systems |
FAT, FAT32, NTFS |
| supported 3G USB adapters |
3G will be available soon via a firmware upgrade! |
| additional info |
supports externally powered USB hubs
does not support a USB connection to a printer |
power
| power consumption |
up to 18W |
